Changed: new cfg cleaned by kerozcak

This commit is contained in:
vl 2010-05-20 10:27:57 +02:00
parent 31171c9078
commit a68f8921d1
30 changed files with 735 additions and 4545 deletions

View file

@ -1,57 +1,16 @@
// Use with commandline: ryzom_admin_service -A. -C. -L. --nobreak --fulladminname=admin_executor_service --shortadminname=AES
#include "admin_executor_service_default.cfg" #include "admin_executor_service_default.cfg"
// I'm the AES, I'll not connect to myself! // ---- config local variables
DontUseAES = 1;
// I don't need a connection to a naming service
DontUseNS = 1;
// Address of the admin service (default port is 49996)
AESAliasName= "aes";
//
DontUseStdIn = 0;
// Address ofthe admin service (default port is 49996)
ASHost = "localhost"; ASHost = "localhost";
ASPort="46701";
// Config for AES // ---- service NeL variables (used by ConfigFile class)
AESPort = "46702";
AESHost = "localhost";
ASPort = "46701";
AESAliasName= "aes_open";
// in second, -1 for not restarting
RestartDelay = 60;
// how many second before aborting the request if not finished
RequestTimeout = 5;
// log path for advanced log report
LogPath = "/.";
// setup for deployment environment with exeternal configuration system responsible for launching apps and
// for configuring AES services
DontLaunchServicesDirectly = 1;
UseExplicitAESRegistration = 1;
KillServicesOnDisconnect = 1;
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 0;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// how to sleep between to network update
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
#include "./aes_alias_name.cfg"
StartCommands= StartCommands=
{ {
@ -73,7 +32,6 @@ StartCommands=
"gw_aes.transportAdd L3Client aes_l3c", "gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr="+AESHost+":"+AESPort+")", "gw_aes.transportCmd aes_l3c(connect addr="+AESHost+":"+AESPort+")",
// create the admin executor service module // create the admin executor service module
"moduleManager.createModule AdminExecutorService aes", "moduleManager.createModule AdminExecutorService aes",
@ -93,11 +51,31 @@ StartCommands=
// plug the as // plug the as
"aes.plug asc_gw", "aes.plug asc_gw",
"aes.plug aes_gw", "aes.plug aes_gw",
};
StartCommands +=
{
"aes.addRegisteredService bms_master open",
// "aes.addRegisteredService bms_pd_master open",
"aes.addRegisteredService egs open",
"aes.addRegisteredService gpms open",
"aes.addRegisteredService ios open",
"aes.addRegisteredService rns open",
"aes.addRegisteredService rws open",
"aes.addRegisteredService ts open",
"aes.addRegisteredService ms open",
"aes.addRegisteredService ais_newbyland open",
"aes.addRegisteredService mfs open",
"aes.addRegisteredService su open",
"aes.addRegisteredService fes open",
"aes.addRegisteredService sbs open",
"aes.addRegisteredService lgs open",
// "aes.addRegisteredService mos open",
// "aes.addRegisteredService pdss open",
"aes.addRegisteredService ras open",
}; };
ShardName="dev";
bms_master = { "./", "/home/nevrax/dev/live/service_backup_service/backup_service", "-C. -L. --nobreak --writepid -P49990" }; bms_master = { "./", "/home/nevrax/dev/live/service_backup_service/backup_service", "-C. -L. --nobreak --writepid -P49990" };
bms_pd_master = { "./", "/home/nevrax/dev/live/service_backup_service/backup_service", "-C. -L. --nobreak --writepid -P49992" }; bms_pd_master = { "./", "/home/nevrax/dev/live/service_backup_service/backup_service", "-C. -L. --nobreak --writepid -P49992" };
egs = { "./", "/home/nevrax/dev/live/service_entities_game_service/entities_game_service", "-C. -L. --nobreak --writepid" }; egs = { "./", "/home/nevrax/dev/live/service_entities_game_service/entities_game_service", "-C. -L. --nobreak --writepid" };
@ -139,24 +117,33 @@ RegisteredServices=
"ras", "ras",
}; };
StartCommands += //
{ DontUseStdIn = 0;
"aes.addRegisteredService bms_master open",
// "aes.addRegisteredService bms_pd_master open", // ---- service NeL variables (used by CVariable class)
"aes.addRegisteredService egs open",
"aes.addRegisteredService gpms open", // If the update loop is too slow, a thread will produce an assertion.
"aes.addRegisteredService ios open", // By default, the value is set to 10 minutes.
"aes.addRegisteredService rns open", // Set to 0 for no assertion.
"aes.addRegisteredService rws open", UpdateAssertionThreadTimeout = 0;
"aes.addRegisteredService ts open",
"aes.addRegisteredService ms open", // ---- service custom variables (used by ConfigFile class)
"aes.addRegisteredService ais_newbyland open",
"aes.addRegisteredService mfs open", // ---- service custom variables (used by CVariable class)
"aes.addRegisteredService su open",
"aes.addRegisteredService fes open", // in second, -1 for not restarting
"aes.addRegisteredService sbs open", RestartDelay = 60;
"aes.addRegisteredService lgs open",
// "aes.addRegisteredService mos open", // how many second before aborting the request if not finished
// "aes.addRegisteredService pdss open", RequestTimeout = 5;
"aes.addRegisteredService ras open",
}; // log path for advanced log report
LogPath = "/.";
// setup for deployment environment with exeternal configuration system responsible for launching apps and
// for configuring AES services
DontLaunchServicesDirectly = 1;
UseExplicitAESRegistration = 1;
KillServicesOnDisconnect = 1;
ShardName="dev";

View file

@ -1 +1,7 @@
#include "common.cfg" #include "common.cfg"
// I'm the AES, I'll not connect to myself!
DontUseAES = 1;
// I don't need a connection to a naming service
DontUseNS = 1;

View file

@ -1,298 +1,22 @@
// Use with commandline: ryzom_admin_service --fulladminname=ryzom_admin_service --shortadminname=AS -C. -L. --nobreak --writepid // Use with commandline: ryzom_admin_service --fulladminname=ryzom_admin_service --shortadminname=AS -C. -L. --nobreak --writepid
AESAliasName= "ras";
// ---- config local variables
ASWebPort="46700"; ASWebPort="46700";
ASPort="46701"; ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "admin_service_default.cfg" #include "admin_service_default.cfg"
Mainlands = { // ---- service NeL variables (used by ConfigFile class)
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; AESAliasName= "ras";
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// ---- service custom variables (used by CVariable class)

View file

@ -1,3 +0,0 @@
AESAliasName= "aes_open";
AESPort="46702";
ASPort="46701";

View file

@ -1,279 +1,17 @@
// Use with commandline: ai_service -C. -L. --nobreak --writepid -mCommon:Newbieland:Post // Use with commandline: ai_service -C. -L. --nobreak --writepid -mCommon:Newbieland:Post
AESAliasName= "ais_newbyland";
ASWebPort="46700"; // ---- config local variables
ASPort="46701";
AESPort="46702";
SUPort = 50505; SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost"; SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "db1.ryzom.com";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "/home/nevrax/live/save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections) // SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort; SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "ai_service_default.cfg" #include "ai_service_default.cfg"
WriteFilesDirectory= "data_shard";
// ---- service NeL variables (used by ConfigFile class)
AESAliasName= "ais_newbyland";
GraphVars += { "TickSpeedLoop", "0" }; GraphVars += { "TickSpeedLoop", "0" };
GraphVars += { "TickSpeedLoop", "60000" }; GraphVars += { "TickSpeedLoop", "60000" };
@ -285,28 +23,47 @@ GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" }; GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" }; GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" }; GraphVars += { "MirrorCallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "../rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
"../common/data_common", "../common/data_common",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
#include "used_continents.cfg"
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// define the primitives configuration used. (AIS, EGS)
UsedPrimitives =
{
"newbieland_all",
};
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// ---- service custom variables (used by CVariable class)
NbPlayersLimit = PlayerLimit;
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
#include "backup_service_interface.cfg"
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;

View file

@ -1,169 +1,19 @@
// Use with commandline: backup_service -C. -L. --nobreak --writepid -P49990 // Use with commandline: backup_service -C. -L. --nobreak --writepid -P49990
AESAliasName= "bms_master";
ASWebPort="46700"; #include "backup_service_default.cfg"
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service // ---- config local variables
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway // ---- service NeL variables (used by ConfigFile class)
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")", AESAliasName = "bms_master";
Paths = {
".",
"../common/data_leveldesign",
}; };
/// A list of vars to graph for any service // ---- service NeL variables (used by CVariable class)
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot // Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = ""; SaveFilesDirectory = "";
@ -171,135 +21,14 @@ SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet) // where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard"; WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path? // ---- service custom variables (used by ConfigFile class)
ConvertSaveFilesDirectoryToFullPath = 0;
WebPort = 49970;
// ---- service custom variables (used by CVariable class)
// BS - Root directory where data are backuped to // BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup"; IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into // Root directory where data from shards are stored into
SaveShardRoot = "save_shard/"; SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "backup_service_default.cfg"
ListeningPort = 49990;
L3ListeningPort = 49950;
WebPort = 49970;
BSReadState = 1;
SaveShardRoot = "save_shard";
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = {
".",
"../common/data_leveldesign",
};

View file

@ -1,23 +1,31 @@
#include "common.cfg" #include "common.cfg"
// ---- service NeL variables (used by ConfigFile class)
DontUseNS = 1;
DontUseNS = BSDontUseNS; // ---- service NeL variables (used by CVariable class)
NSHost = BSNSHost;
ListeningPort = 49990; ListeningPort = 49990;
// ---- service custom variables (used by ConfigFile class)
// Listening port for the Web server to connect in
WebPort = 49898;
BSReadState = 1;
// ---- service custom variables (used by CVariable class)
// Port for the Layer 3 interface of the backup service // Port for the Layer 3 interface of the backup service
L3ListeningPort = 49950; L3ListeningPort = 49950;
// Listening port for the Web server to connect in
WebPort = 49898;
// template path from SaveShardRoot to find character saves // template path from SaveShardRoot to find character saves
SaveTemplatePath = "$shard/characters/account_$userid_$charid$ext"; SaveTemplatePath = "$shard/characters/account_$userid_$charid$ext";
// character saves possible extension list // character saves possible extension list
SaveExtList = "_pdr.bin _pdr.xml .bin"; SaveExtList = "_pdr.bin _pdr.xml .bin";
BSReadState = 1;
//BSFilePrefix = "R:/code/ryzom/r2_shard/"; //BSFilePrefix = "R:/code/ryzom/r2_shard/";
//BSFileSubst = "r2_shard/"; //BSFileSubst = "r2_shard/";

View file

@ -0,0 +1,5 @@
L3BSPort = "49950";
BSHost = "localhost:49990";
UseBS = 1;
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";

View file

@ -1,2 +1,99 @@
// ---- config local variables
// Used by ConfigFile in EGS and WS
ShardId = 302;
// Used by CVariable in WS
PlayerLimit = 5000;
// Used to connect to AES (this file) and to set up AES service (admin_executor_service.cfg)
AESPort="46702";
AESHost="localhost";
// ---- service NeL variables (used by ConfigFile class)
WindowStyle = "WIN"; WindowStyle = "WIN";
// don't connect to the old NeLNS AES
DontUseAES = 1;
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr="+AESHost+":"+AESPort+")",
};
NSHost = "localhost";
// A list of vars to graph for any service
GraphVars +=
{
"ProcessUsedMemory", "60000", // every minute
};
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
// ---- service NeL variables (used by CVariable class)
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// ---- service custom variables (used by ConfigFile class)
// ---- service custom variables (used by CVariable class)

View file

@ -1,282 +1,94 @@
// Use with commandline: entities_game_service -C. -L. --nobreak --writepid // Use with commandline: entities_game_service -C. -L. --nobreak --writepid
AESAliasName= "egs";
ASWebPort="46700"; // ---- config local variables
ASPort="46701";
#define DONT_USE_LGS_SLAVE
AESPort="46702"; AESPort="46702";
SUPort = 50505; SUPort = 50505;
SUGlobalPort = 50503; SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292; L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993; L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost"; SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost"; MasterLGSHost = "localhost";
SlaveLGSHost = "localhost"; SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections) // SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort; SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics -------------------------------------------------------------------------- #include "entities_game_service_default.cfg"
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config -------------------------------------------------------------------------- // ---- service NeL variables (used by ConfigFile class)
// set to 0 if you want to use the admin system
DontUseAES = 1; AESAliasName= "egs";
StartCommands += {
"moduleManager.createModule AnimSessionManager asm",
"asm.plug gw",
};
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 302 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
GraphVars += { "CharacterLoadPerTick", "0" };
GraphVars += { "CharacterLoadPerTick", "60000" };
GraphVars += { "CharacterSavePerTick", "0" };
GraphVars += { "CharacterSavePerTick", "60000" };
GraphVars += { "TickSpeedLoop", "0" };
GraphVars += { "TickSpeedLoop", "60000" };
GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" };
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost"; NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000; Paths = {
".",
"../common/data_common",
"../common/data_leveldesign",
};
PathsNoRecurse= {"."};
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
WebSrvHost = "http://localhost:55555/";
NbPlayersLimit = PlayerLimit;
NbGuildLimit = 15000; NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS) // Entity Limits (EGS)
NbObjectsLimit = 2000; NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000; NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000; NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000; NbToxicCloudsLimit = 5000;
// AIS Specifics -------------------------------------------------------------------------- #include "used_continents.cfg"
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number // define the primitives configuration used.
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives = UsedPrimitives =
{ {
"newbieland_all", "newbieland_all",
}; };
//UsedContinents = { "dummy", "10000" };
#include "entities_game_service_default.cfg" // the following variable must be defined but should be empty - it's presence is used to change the behaviour
PathsNoRecurse= {"."}; // of the packed sheet reader
NeverAggroPriv = ":OBSERVER:G:SG:GM:SGM:EM:"; GeorgePaths = { "" };
AlwaysInvisiblePriv = ":OBSERVER:EM:";
TimeBeforeDisconnection = 300; HomeMainlandNames =
{
"302", "Open", "open",
};
/* /*
UsedContinents += UsedContinents +=
{ {
@ -328,54 +140,64 @@ UsedPrimitives =
}; };
*/ */
StartCommands += { // Mirror limits
"moduleManager.createModule AnimSessionManager asm", DatasetSizefe_temp = 600000;
"asm.plug gw", DatasetSizefame = 26000;
};
GraphVars += { "NbPlayers", "60000" }; // ---- service custom variables (used by CVariable class)
GraphVars += { "CharacterLoadPerTick", "0" };
GraphVars += { "CharacterLoadPerTick", "60000" }; RingRPEnabled=0;
GraphVars += { "CharacterSavePerTick", "0" };
GraphVars += { "CharacterSavePerTick", "60000" };
GraphVars += { "TickSpeedLoop", "0" };
GraphVars += { "TickSpeedLoop", "60000" };
GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" };
RingRPXPRequiredPerAction=700; RingRPXPRequiredPerAction=700;
RingRPXPRequiredPerTimeSlice=700; RingRPXPRequiredPerTimeSlice=700;
MaxXPGainPerPlayer = 30.0; MaxXPGainPerPlayer = 30.0;
DeathXPFactor = 0.1; DeathXPFactor = 0.1;
CachePrims = 1;
CorrectInvalidPlayerPositions = 1;
WebSrvHost = "http://localhost:55555/";
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; MFSHost = "localhost";
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { // Use Shard Unifier or not
".", DontUseSU = 0;
"../common/data_common",
"../common/data_leveldesign", // Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
}; IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
FixedSessionId = ShardId;
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
#include "backup_service_interface.cfg"
XMLSave = 0;

View file

@ -1,7 +1,5 @@
#include "common.cfg" #include "common.cfg"
#ifndef DONT_USE_LGS_SLAVE
StartCommands += StartCommands +=
{ {
// L5 connect to the shard unifier // L5 connect to the shard unifier
@ -24,64 +22,22 @@ StartCommands +=
"lgs_gw.transportAdd L3Client masterL3c", "lgs_gw.transportAdd L3Client masterL3c",
// open the transport // open the transport
"lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")", "lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")",
};
#ifndef DONT_USE_LGS_SLAVE
StartCommands +=
{
// add a layer 3 server transport for slave logger service // add a layer 3 server transport for slave logger service
"lgs_gw.transportAdd L3Client slaveL3c", "lgs_gw.transportAdd L3Client slaveL3c",
// open the transport // open the transport
"lgs_gw.transportCmd slaveL3c(connect addr="+SlaveLGSHost+":"+L3SlaveLGSPort+")", "lgs_gw.transportCmd slaveL3c(connect addr="+SlaveLGSHost+":"+L3SlaveLGSPort+")",
};
// Create a shard unifier client module
"moduleManager.createModule ShardUnifierClient suc",
// Create a client commands forwader module
"moduleManager.createModule ClientCommandForwader ccf",
// Create a characer control module
"moduleManager.createModule CharacterControl cc",
// Create a guild unifier module
"moduleManager.createModule GuildUnifier gu",
//Create a shard unifier name mapper
"moduleManager.createModule CharNameMapperClient cnmc",
// Create the logger service client module
"moduleManager.createModule LoggerServiceClient lsc",
"suc.plug gw",
"ccf.plug gw",
"cc.plug gw",
"gu.plug glob_gw",
"cnmc.plug gw",
"lsc.plug lgs_gw",
};
#endif #endif
#ifdef DONT_USE_LGS_SLAVE
StartCommands += StartCommands +=
{ {
// L5 connect to the shard unifier
"unifiedNetwork.addService ShardUnifier ( address="+SUAddress+" sendId external autoRetry )",
// Create a gateway for global interconnection
// modules from different shard are visible to each other if they connect to
// this gateway. SU Local module have no interest to be plugged here.
"moduleManager.createModule StandardGateway glob_gw",
// add a layer 3 server transport
"glob_gw.transportAdd L3Client l3c",
// open the transport
"glob_gw.transportCmd l3c(connect addr="+SUHost+":"+SUGlobalPort+")",
// Create a gateway for logger service connection
"moduleManager.createModule StandardGateway lgs_gw",
// add a layer 3 server transport for master logger service
"lgs_gw.transportAdd L3Client masterL3c",
// open the transport
"lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")",
// Create a shard unifier client module // Create a shard unifier client module
"moduleManager.createModule ShardUnifierClient suc", "moduleManager.createModule ShardUnifierClient suc",
// Create a client commands forwader module // Create a client commands forwader module
@ -105,7 +61,6 @@ StartCommands +=
"gu.plug glob_gw", "gu.plug glob_gw",
"cnmc.plug gw", "cnmc.plug gw",
"lsc.plug lgs_gw", "lsc.plug lgs_gw",
}; };
#endif #endif

View file

@ -1,281 +1,19 @@
// Use with commandline: frontend_service -C. -L. --nobreak --writepid // Use with commandline: frontend_service -C. -L. --nobreak --writepid
AESAliasName= "fes";
//AcceptInvalidCookie = 1; // ---- config local variables
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "open.ryzom.com";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth // Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1; BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
FSUDPPort = 47851; FSUDPPort = 47851;
FSListenHost = "open.ryzom.com";
#include "frontend_service_default.cfg" #include "frontend_service_default.cfg"
// ---- service NeL variables (used by ConfigFile class)
AESAliasName= "fes";
GraphVars += { "TickSpeedLoop", "0" }; GraphVars += { "TickSpeedLoop", "0" };
GraphVars += { "TickSpeedLoop", "60000" }; GraphVars += { "TickSpeedLoop", "60000" };
GraphVars += { "L5CallbackCount", "0" }; GraphVars += { "L5CallbackCount", "0" };
@ -286,28 +24,29 @@ GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" }; GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" }; GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" }; GraphVars += { "MirrorCallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
"../common/data_common", "../common/data_common",
".", ".",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
//AcceptInvalidCookie = 1;
ClientLimit = 1000;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// ---- service custom variables (used by CVariable class)
// Disable ryzom verbose logging
VerboseMIRROR = 0;
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";

View file

@ -1,311 +1,44 @@
// Use with commandline: gpm_service -C. -L. --nobreak --writepid // Use with commandline: gpm_service -C. -L. --nobreak --writepid
AESAliasName= "gpms";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
//#include "../live/cfg/gpm_service_mainland.cfg"
#include "gpm_service_default.cfg" #include "gpm_service_default.cfg"
GraphVars += { "TickSpeedLoop", "0" }; // ---- config local variables
GraphVars += { "TickSpeedLoop", "60000" };
GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; // ---- service NeL variables (used by ConfigFile class)
RingRPEnabled=0;
DomainName = "ryzom_open"; AESAliasName= "gpms";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards GraphVars += { "TickSpeedLoop", "0" };
StartCommands += { "setShardExchangeLimit 301 250" }; GraphVars += { "TickSpeedLoop", "60000" };
StartCommands += { "displayShardExchangeLimits" }; GraphVars += { "L5CallbackCount", "0" };
StartCommands += { "EnableStlAllocatorChecker 0" }; GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
GraphVars += { "MirrorCallbackCount", "0" };
GraphVars += { "MirrorCallbackCount", "60000" };
GraphVars += { "MirrorCallbackTime", "0" };
GraphVars += { "MirrorCallbackTime", "60000" };
Paths = { Paths = {
".", ".",
"../common/data_common", "../common/data_common",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
#include "used_continents.cfg"
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// ---- service custom variables (used by CVariable class)
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;

View file

@ -1,5 +1,5 @@
#include "common.cfg" #include "common.cfg"
CheckPlayerSpeed = 0; CheckPlayerSpeed = 0;
SecuritySpeedFactor = 1.5; SecuritySpeedFactor = 1.5;

View file

@ -1,283 +1,26 @@
// Use with commandline: input_output_service -C. -L. --nobreak --writepid // Use with commandline: input_output_service -C. -L. --nobreak --writepid
AESAliasName= "ios";
ASWebPort="46700"; // ---- config local variables
ASPort="46701";
#define DONT_USE_LGS_SLAVE
AESPort="46702"; AESPort="46702";
SUPort = 50505; SUPort = 50505;
SUGlobalPort = 50503; SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292; L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993; L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost"; SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost"; MasterLGSHost = "localhost";
SlaveLGSHost = "localhost"; SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections) // SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort; SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "input_output_service_default.cfg" #include "input_output_service_default.cfg"
VerboseStringManager = 0; // ---- service NeL variables (used by ConfigFile class)
VerboseStringManagerParser = 0;
VerboseChat = 0; AESAliasName= "ios";
VerboseChatManagement = 0;
VerboseNameTranslation = 0;
// Create a char name mapper // Create a char name mapper
StartCommands += StartCommands +=
{ {
@ -286,28 +29,53 @@ StartCommands +=
"moduleManager.createModule IOSRingModule iosrm", "moduleManager.createModule IOSRingModule iosrm",
"iosrm.plug gw", "iosrm.plug gw",
}; };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
"../common/data_common", "../common/data_common",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Use Shard Unifier or not
DontUseSU = 0;
HomeMainlandNames =
{
"302", "Open", "open",
};
// ---- service custom variables (used by CVariable class)
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
#include "backup_service_interface.cfg"
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
ReadTranslationWork = 1;
TranslationWorkPath = "";
VerboseStringManager = 0;
VerboseStringManagerParser = 0;
VerboseChat = 0;
VerboseChatManagement = 0;
VerboseNameTranslation = 0;

View file

@ -1,6 +1,6 @@
#include "common.cfg" #include "common.cfg"
#ifndef DONT_USE_LGS_SLAVE // ---- service NeL variables (used by ConfigFile class)
StartCommands += StartCommands +=
{ {
@ -23,52 +23,25 @@ StartCommands +=
"lgs_gw.transportAdd L3Client masterL3c", "lgs_gw.transportAdd L3Client masterL3c",
// open the transport // open the transport
"lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")", "lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")",
};
#ifndef DONT_USE_LGS_SLAVE
StartCommands +=
{
// add a layer 3 server transport for slave logger service // add a layer 3 server transport for slave logger service
"lgs_gw.transportAdd L3Client slaveL3c", "lgs_gw.transportAdd L3Client slaveL3c",
// open the transport // open the transport
"lgs_gw.transportCmd slaveL3c(connect addr="+SlaveLGSHost+":"+L3SlaveLGSPort+")", "lgs_gw.transportCmd slaveL3c(connect addr="+SlaveLGSHost+":"+L3SlaveLGSPort+")",
};
// Create a chat unifier client
"moduleManager.createModule ChatUnifierClient cuc",
// and plug it on the gateway to reach the SU ChatUnifierServer
"cuc.plug glob_gw",
"cuc.plug gw",
// Create the logger service client module
"moduleManager.createModule LoggerServiceClient lsc",
"lsc.plug lgs_gw",
};
#endif #endif
#ifdef DONT_USE_LGS_SLAVE
StartCommands += StartCommands +=
{ {
// L5 connect to the shard unifier
"unifiedNetwork.addService ShardUnifier ( address="+SUAddress+" sendId external autoRetry )",
// Create a gateway for global interconnection
// modules from different shard are visible to each other if they connect to
// this gateway. SU Local module have no interest to be plugged here.
"moduleManager.createModule StandardGateway glob_gw",
// add a layer 3 server transport
"glob_gw.transportAdd L3Client l3c",
// open the transport
"glob_gw.transportCmd l3c(connect addr="+SUHost+":"+SUGlobalPort+")",
// Create a gateway for logger service connection
"moduleManager.createModule StandardGateway lgs_gw",
// add a layer 3 server transport for master logger service
"lgs_gw.transportAdd L3Client masterL3c",
// open the transport
"lgs_gw.transportCmd masterL3c(connect addr="+MasterLGSHost+":"+L3MasterLGSPort+")",
// Create a chat unifier client // Create a chat unifier client
"moduleManager.createModule ChatUnifierClient cuc", "moduleManager.createModule ChatUnifierClient cuc",
// and plug it on the gateway to reach the SU ChatUnifierServer // and plug it on the gateway to reach the SU ChatUnifierServer
"cuc.plug glob_gw", "cuc.plug glob_gw",
"cuc.plug gw", "cuc.plug gw",
@ -76,36 +49,36 @@ StartCommands +=
// Create the logger service client module // Create the logger service client module
"moduleManager.createModule LoggerServiceClient lsc", "moduleManager.createModule LoggerServiceClient lsc",
"lsc.plug lgs_gw", "lsc.plug lgs_gw",
}; };
#endif #endif
DisableMonotonicClock = 1; // ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// a list of system command that can be run with "sysCmd" service command. // a list of system command that can be run with "sysCmd" service command.
SystemCmd = {}; SystemCmd = {};
// IOS don't use work directory by default // IOS don't use work directory by default
ReadTranslationWork = 0; ReadTranslationWork = 0;
TranslationWorkPath = "translation/work"; TranslationWorkPath = "translation/work";
// Global shard bot name translation file. You sould overide this // Global shard bot name translation file. You sould overide this
// in input_output_service.cfg to specialize the file // in input_output_service.cfg to specialize the file
// depending on the shard main language. // depending on the shard main language.
BotNameTranslationFile = "bot_names.txt"; BotNameTranslationFile = "bot_names.txt";
// Global shard event faction translation file. You sould override this // Global shard event faction translation file. You sould override this
// in input_output_service.cfg to specialize the file // in input_output_service.cfg to specialize the file
// depending on the shard main language. // depending on the shard main language.
EventFactionTranslationFile = "event_factions.txt"; EventFactionTranslationFile = "event_factions.txt";
// ---- service custom variables (used by CVariable class)
// Activate/deactivate debugging of missing paremeter replacement // Activate/deactivate debugging of missing paremeter replacement
DebugReplacementParameter = 1; DebugReplacementParameter = 1;
// Id of database for PDS Chat Logging
DatabaseId = 1;
// Default verbose debug flags: // Default verbose debug flags:
//----------------------------- //-----------------------------

View file

@ -1,285 +1,15 @@
// Use with commandline: logger_service -C. -L. --nobreak --writepid // Use with commandline: logger_service -C. -L. --nobreak --writepid
#include "logger_service_default.cfg" #include "logger_service_default.cfg"
// ---- config local variables
LGSL3Port = 41292;
// ---- service NeL variables (used by ConfigFile class)
AESAliasName= "lgs"; AESAliasName= "lgs";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "db1.ryzom.com";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "/home/nevrax/live/save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "r2_shard/data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_dev";
// Nel DB user
DBNelUser = "su_dev";
// Ring DB user
DBRingUser = "su_dev";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "logger_service_default.cfg"
LogQueryResultFile = "log_query_result.txt";
SaveFilesDirectory = "save_shard/";
BSHost = LGSBSHost+":"+LGSBSPort;
L3BSPort = LGSBSPort;
DontUseNS = 1;
StartCommands += StartCommands +=
{ {
"moduleManager.createModule LoggerService ls", "moduleManager.createModule LoggerService ls",
@ -289,29 +19,32 @@ StartCommands +=
"lgs_gw.transportOptions l3s(PeerInvisible)", "lgs_gw.transportOptions l3s(PeerInvisible)",
"lgs_gw.transportCmd l3s(open port="+ LGSL3Port +")", "lgs_gw.transportCmd l3s(open port="+ LGSL3Port +")",
}; };
SaveShardRoot = "save_shard";
SaveFilesDirectory = "save_shard/";
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "../rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; DontUseNS = 1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "save_shard/";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "r2_shard/data_shard";
// ---- service custom variables (used by ConfigFile class)
// Use Shard Unifier or not
DontUseSU = 0;
HomeMainlandNames =
{
"302", "Open", "open",
};
// ---- service custom variables (used by CVariable class)
#include "backup_service_interface.cfg"

View file

@ -1,299 +1,19 @@
// Use with commandline: mail_forum_service -C. -L. --nobreak --writepid // Use with commandline: mail_forum_service -C. -L. --nobreak --writepid
AESAliasName= "mfs";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "db1.ryzom.com";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "/home/nevrax/live/save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "r2_shard/data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_dev";
// Nel DB user
DBNelUser = "su_dev";
// Ring DB user
DBRingUser = "su_dev";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "mail_forum_service_default.cfg" #include "mail_forum_service_default.cfg"
WriteFilesDirectory="data_shard";
Mainlands = { // ---- config local variables
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "../rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; // ---- service NeL variables (used by ConfigFile class)
RingRPEnabled=0;
DomainName = "ryzom_open"; AESAliasName= "mfs";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// ---- service custom variables (used by CVariable class)

View file

@ -1,7 +1,16 @@
#include "common.cfg" #include "common.cfg"
// ---- service NeL variables (used by ConfigFile class)
DontUseNS = 1;
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// ---- service custom variables (used by CVariable class)
WebRootDirectory = "save_shard/www"; WebRootDirectory = "save_shard/www";
DontUseNS = 1;
// Set if Hall of Fame generator is enabled // Set if Hall of Fame generator is enabled
HoFEnableGenerator = 1; HoFEnableGenerator = 1;

View file

@ -1,306 +1,38 @@
// Use with commandline: mirror_service -C. -L. --nobreak --writepid // Use with commandline: mirror_service -C. -L. --nobreak --writepid
AESAliasName= "ms";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "mirror_service_default.cfg" #include "mirror_service_default.cfg"
GraphVars += { "UserSpeedLoop", "0" }; // ---- config local variables
GraphVars += { "UserSpeedLoop", "60000" };
GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; // ---- service NeL variables (used by ConfigFile class)
RingRPEnabled=0;
DomainName = "ryzom_open"; AESAliasName= "ms";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards GraphVars += { "UserSpeedLoop", "0" };
StartCommands += { "setShardExchangeLimit 301 250" }; GraphVars += { "UserSpeedLoop", "60000" };
StartCommands += { "displayShardExchangeLimits" }; GraphVars += { "L5CallbackCount", "0" };
StartCommands += { "EnableStlAllocatorChecker 0" }; GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" };
Paths = { Paths = {
".", ".",
"../common/data_common", "../common/data_common",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// ---- service custom variables (used by CVariable class)
// Disable ryzom verbose logging
VerboseMIRROR = 0;

View file

@ -1,4 +1,6 @@
#include "common.cfg" #include "common.cfg"
// ---- service custom variables (used by ConfigFile class)
// Linux only // Linux only
DestroyGhostSegments = 1; DestroyGhostSegments = 1;

View file

@ -1,298 +1,21 @@
// Use with commandline: ryzom_naming_service -C. -L. --nobreak --writepid // Use with commandline: ryzom_naming_service -C. -L. --nobreak --writepid
AESAliasName= "rns";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "naming_service_default.cfg" #include "naming_service_default.cfg"
Mainlands = { // ---- config local variables
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; // ---- service NeL variables (used by ConfigFile class)
RingRPEnabled=0;
DomainName = "ryzom_open"; AESAliasName= "rns";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
"data_www" "data_www"
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
BasePort = 51000;
// ---- service custom variables (used by CVariable class)

View file

@ -1,279 +1,19 @@
// Use with commandline: session_browser_server -C. -L. --nobreak --writepid // Use with commandline: session_browser_server -C. -L. --nobreak --writepid
#include "session_browser_server_default.cfg"
// ---- config local variables
#include "sql.cfg"
SBSPort = 48851;
SUHost = "localhost";
// ---- service NeL variables (used by ConfigFile class)
AESAliasName= "sbs"; AESAliasName= "sbs";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
FSUDPPort = 47851;
SBSPort = FSUDPPort+1000;
DontUseNS = 0;
StartCommands += StartCommands +=
{ {
"moduleManager.createModule SessionBrowserServerMod sbs suAddr="+SUHost+":49999 listenPort="+SBSPort+" ring_db(host="+DBHost+" user="+DBRingUser+" password="+DBRingPass+" base="+DBRingName+")", "moduleManager.createModule SessionBrowserServerMod sbs suAddr="+SUHost+":49999 listenPort="+SBSPort+" ring_db(host="+DBHost+" user="+DBRingUser+" password="+DBRingPass+" base="+DBRingName+")",
@ -286,26 +26,24 @@ GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" }; GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" }; GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" }; GraphVars += { "L5CallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// Use Shard Unifier or not
DontUseSU = 0;
HomeMainlandNames =
{
"302", "Open", "open",
};
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// ---- service custom variables (used by CVariable class)

View file

@ -0,0 +1 @@
#include "common.cfg"

View file

@ -1,284 +1,24 @@
// Use with commandline: shard_unifier_service -C. -L. --nobreak --writepid // Use with commandline: shard_unifier_service -C. -L. --nobreak --writepid
AESAliasName= "su";
ASWebPort="46700"; // ---- config local variables
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503; SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service #include "sql.cfg"
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "shard_unifier_service_default.cfg" #include "shard_unifier_service_default.cfg"
// ---- service NeL variables (used by ConfigFile class)
AESAliasName= "su";
// Create a command executor // Create a command executor
StartCommands += StartCommands +=
{ {
"moduleManager.createModule CommandExecutor ce", "moduleManager.createModule CommandExecutor ce",
"ce.plug gw", "ce.plug gw",
}; };
GraphVars += { "TotalConcurentUser", "60000" }; GraphVars += { "TotalConcurentUser", "60000" };
GraphVars += { "NetSpeedLoop", "0" }; GraphVars += { "NetSpeedLoop", "0" };
GraphVars += { "NetSpeedLoop", "60000" }; GraphVars += { "NetSpeedLoop", "60000" };
@ -286,26 +26,28 @@ GraphVars += { "L5CallbackCount", "0" };
GraphVars += { "L5CallbackCount", "60000" }; GraphVars += { "L5CallbackCount", "60000" };
GraphVars += { "L5CallbackTime", "0" }; GraphVars += { "L5CallbackTime", "0" };
GraphVars += { "L5CallbackTime", "60000" }; GraphVars += { "L5CallbackTime", "60000" };
Mainlands = {
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1;
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// Use Shard Unifier or not
DontUseSU = 0;
HomeMainlandNames =
{
"302", "Open", "open",
};
// ---- service custom variables (used by CVariable class)
DomainName = "ryzom_open";
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
#include "backup_service_interface.cfg"

View file

@ -1,11 +1,7 @@
#include "common.cfg" #include "common.cfg"
NSHost = SUNSHost; DontUseNS = 1;
DontUseNS = SUDontUseNS;
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
StartCommands += StartCommands +=
{ {
// Create a gateway for global interconnection // Create a gateway for global interconnection

14
code/ryzom/server/sql.cfg Normal file
View file

@ -0,0 +1,14 @@
DBHost = "localhost";
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// MySQL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;

View file

@ -1,300 +1,30 @@
// Use with commandline: tick_service -C. -L. --nobreak --writepid // Use with commandline: tick_service -C. -L. --nobreak --writepid
AESAliasName= "ts";
ASWebPort="46700";
ASPort="46701";
AESPort="46702";
SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "tick_service_default.cfg" #include "tick_service_default.cfg"
Mainlands = { // ---- config local variables
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; // ---- service NeL variables (used by ConfigFile class)
RingRPEnabled=0;
DomainName = "ryzom_open"; AESAliasName= "ts";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
"../common/data_common", "../common/data_common",
"../common/data_leveldesign", "../common/data_leveldesign",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// ---- service custom variables (used by CVariable class)
// Disable ryzom verbose logging
VerboseMIRROR = 0;
#include "backup_service_interface.cfg"

View file

@ -0,0 +1,14 @@
// This is the mapping for logical continent to physical one (server_share/used_continent.cpp)
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// This is the list of continent to use with their unique instance number (server_share/used_continent.cpp)
UsedContinents =
{
"newbieland", "20",
};

View file

@ -1,298 +1,34 @@
// Use with commandline: ryzom_welcome_service -C. -L. --nobreak --writepid // Use with commandline: ryzom_welcome_service -C. -L. --nobreak --writepid
AESAliasName= "rws";
ASWebPort="46700"; // ---- config local variables
ASPort="46701";
AESPort="46702";
SUPort = 50505; SUPort = 50505;
SUGlobalPort = 50503;
L3BSPort = "49950";
L3MasterLGSPort = 41292;
L3SlaveLGSPort = 49993;
LGSBSPort = 49990;
L3LGSBSPort = 49990;
LGSL3Port = L3MasterLGSPort;
SUHost = "localhost"; SUHost = "localhost";
MFSHost = "localhost";
BSHost = "localhost:49990";
MasterLGSHost = "localhost";
SlaveLGSHost = "localhost";
LGSBSHost = "localhost";
DBHost = "localhost";
#define DONT_USE_LGS_SLAVE
// Configure module gateway for layer 5 module comm
StartCommands +=
{
// Create a gateway module
"moduleManager.createModule StandardGateway gw",
// add a layer 5 transport
"gw.transportAdd L5Transport l5",
// open the transport
"gw.transportCmd l5(open)",
/// Create default connection with admin executor service
// Create a gateway module
"moduleManager.createModule StandardGateway gw_aes",
// create the admin executor service module
"moduleManager.createModule AdminExecutorServiceClient aes_client",
"aes_client.plug gw_aes",
// create a layer 3 client to connect to aes gateway
"gw_aes.transportAdd L3Client aes_l3c",
"gw_aes.transportCmd aes_l3c(connect addr=localhost:"+AESPort+")",
};
/// A list of vars to graph for any service
GraphVars =
{
"ProcessUsedMemory", "60000", // every minute
};
/* Force default value for PDLib directory (e.g. SaveFilesDirectory...)
* PLEASE NOTICE THAT THIS LINE MUST BE LEFT TO ""
* Only log analyser must have the $shard parameter to find all shards root directory
*/
PDRootDirectory = "";
// Log PD updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableLog = 1;
// Log PD StringManager updates to log file (1 enabled, 0 disabled), see PDLogSaveDirectory to choose where to log
PDEnableStringLog = 0;
// Number of seconds between 2 logs to file
PDLogUpdate = 10;
// MySGL wrapper strict mode - controls use of asserts if SQL requests fail
MSWStrictMode=0;
// This is the mapping for logical continent to physical one
ContinentNameTranslator =
{
"matis_newbie", "matis",
"zorai_newbie", "zorai",
"terre", "terre_oubliee",
"sources", "sources_interdites"
};
// Block the system in the tick service that provokes stalls when overloaded
WaitForBSThreshold=0;
IgnoredFiles = { "continent.cfg", "__read_me.txt", "bandit.html", "flora_primr.primitive" };
// If the update loop is too slow, a thread will produce an assertion.
// By default, the value is set to 10 minutes.
// Set to 0 for no assertion.
UpdateAssertionThreadTimeout = 6000000;
DefaultMaxExpectedBlockSize = 200000000; // 200 M !
DefaultMaxSentBlockSize = 200000000; // 200 M !
// MS Packet size limit in bytes, PER DATASET (warning: depending on the weights, limits per property may be very small)
MaxOutBandwidth = 100000000;
// how to sleep between 2 network updates
// 0 = pipe
// 1 = usleep
// 2 = nanosleep
// 3 = sched_yield
// 4 = nothing
UseYieldMethod = 0;
// The privileges needed to access any ring session
PrivilegeForSessionAccess = ":DEV:SGM:GM:SG:";
// The max number of ring points (aka ring access) for each ecosystem
MaxRingPoints = "A1:D7:F7:J8:L6:R13";
// Level limit for newb scenarios
FreeTrialSkillLimit=21;
// Level limit for newb scenarios
DefaultInterShardExchangeLevelCap=0;
// Configureation for DSS
MaxNpcs = 300;
MaxStaticObjects = 200;
// the following variable must be defined but should be empty - it's presence is used to change the behaviour
// of the packed sheet reader
GeorgePaths = { "" };
// Disable nel net verbose logging
VerboseNETTC = 0;
VerboseLNETL0 = 0;
VerboseLNETL1 = 0;
VerboseLNETL2 = 0;
VerboseLNETL3 = 0;
VerboseLNETL4 = 0;
VerboseLNETL5 = 0;
VerboseLNETL6 = 0;
// Disable ryzom verbose logging
VerboseMIRROR = 0;
VerboseRingRPLog = 0;
VerboseCDBGroup = 0;
// What to do with characters coming from another mainland shard?
// 0: teleport to the stored session id
// 1: let the character play anyway, but leave the stored session id unchanged
// 2: assign the stored session id with FixedSessionId and let play
AllowCharsFromAllSessions = 0;
// Use Shard Unifier or not
DontUseSU = 0;
// the domain's set of useful addresses
LSHost = SUHost;
RSMHost = SUHost;
// MFS config
WebSrvUsersDirectory = "";
WebRootDirectory = "save_shard/www";
HoFHDTDirectory = "/local/www/hof/hdt";
// BS Specifics --------------------------------------------------------------------------
// BS - set to 1 if a BS is not part of a naming service group (then BS not disclosed
// to other services by the Layer 5, i.e. the services sending requests to BS have
// to know its/their address(es) by another mean)
BSDontUseNS = 1;
// BS - set the host of the naming service where the BS register
BSNSHost = "localhost";
UseBS = 1;
XMLSave = 0;
// Where to save specific shard data (ie: player backup), relatively to SaveShardRoot
SaveFilesDirectory = "";
// where to save generic shard data (ie: packed_sheet)
WriteFilesDirectory = "data_shard";
// Will SaveFilesDirectory will be converted to a full path?
ConvertSaveFilesDirectoryToFullPath = 0;
// BS - Root directory where data are backuped to
IncrementalBackupDirectory = "../incremental_backup";
// IOS - Directory to store ios.string_cache file
StringManagerCacheDirectory = "data_shard_local";
// IOS - Directory to log chat into
LogChatDirectory = "data_shard_local";
// MFS - Directories
WebRootDirectory = "../www";
// Root directory where data from shards are stored into
SaveShardRoot = "save_shard/";
// SU Specifics --------------------------------------------------------------------------
// SU - set to 1 if SU didn't use a naming service
SUDontUseNS = 1;
// SU - host for the NS used by SU
SUNSHost = "localhost";
// SU - listen address of the SU service (for L5 connections) // SU - listen address of the SU service (for L5 connections)
SUAddress = SUHost+":"+SUPort; SUAddress = SUHost+":"+SUPort;
// SU - nel and ring database names
DBNelName = "nel";
DBRingName = "ring_open";
// Nel DB user
DBNelUser = "shard";
// Ring DB user
DBRingUser = "shard";
// SU - password to access to the nel database with DBNelUseruser (default is no password)
DBNelPass = "";
// SU - password to access to the ring database with DBRingUser (default is no password)
DBRingPass = "";
// WS Specifics --------------------------------------------------------------------------
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
// Global config --------------------------------------------------------------------------
// set to 0 if you want to use the admin system
DontUseAES = 1;
// Disable generation / display of nldebug messages
DisableNLDebug = 1;
FSListenHost = "localhost";
DBPass="";
ShardId = 302;
BasePort = 51000;
SaveFilesDirectory="";
NSHost = "localhost";
// Player limits (AIS, EGS, WS, FS)
NbPlayersLimit = 5000;
NbGuildLimit = 15000;
PlayerLimit = NbPlayersLimit;
ClientLimit = 1000;
// Set this shard as a ring (1) or mainland (0) shard (main behavior switch)
IsRingShard = 0;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
NoWSShardId = ShardId;
FixedSessionId = ShardId;
// Mirror limits
DatasetSizefe_temp = 600000;
DatasetSizefame = 26000;
// FS Specifics --------------------------------------------------------------------------
// Client bandwidth ratio, set to 1 for standard opration, more than one allocate more bandwidth
BandwidthRatio = 1;
// EGS Specifics --------------------------------------------------------------------------
// Entity Limits (EGS)
NbObjectsLimit = 2000;
NbNpcSpawnedByEGSLimit = 5000;
NbForageSourcesLimit = 10000;
NbToxicCloudsLimit = 5000;
// AIS Specifics --------------------------------------------------------------------------
// Entity Limits (AIS)
NbPetLimit = NbPlayersLimit*4;
NbFaunaLimit = 50000;
NbNpcLimit = 20000;
NbFxLimit = 500;
// This is the list of continent to use with their unique instance number
UsedContinents =
{
"newbieland", "20",
};
// define the primitives configuration used.
UsedPrimitives =
{
"newbieland_all",
};
#include "welcome_service_default.cfg" #include "welcome_service_default.cfg"
Mainlands = { // ---- service NeL variables (used by ConfigFile class)
"302", "Open", "(Open Developer Community)", "en",
};
HomeMainlandNames =
{
"302", "Open", "open",
};
RRDVarPath = "save_shard/rrd_graphs";
ReadTranslationWork = 1;
TranslationWorkPath = "";
DontUseAES=1; AESAliasName= "rws";
RingRPEnabled=0;
DomainName = "ryzom_open";
EnableStlAllocatorChecker = 0;
// start commands for setting up the exchange level caps of different ryzom shards
StartCommands += { "setShardExchangeLimit 301 250" };
StartCommands += { "displayShardExchangeLimits" };
StartCommands += { "EnableStlAllocatorChecker 0" };
Paths = { Paths = {
".", ".",
}; };
// ---- service NeL variables (used by CVariable class)
// ---- service custom variables (used by ConfigFile class)
// WS - use or not the legacy WelcomeService from nel ns (only for backward compatibility during transition to ring)
DontUseLSService = 1;
LSHost = SUHost;
// Set a mainland SessionId.
// Live: Must be 0 for ring shards, non-zero (usually ShardId) for mainland shards
// Dev: Can be non-zero to initially connect a client to a ring shard
FixedSessionId = ShardId;
// ---- service custom variables (used by CVariable class)